Opportunities
Search

The Biosensing program is part of the Engineering Biology and Health cluster, which also includes 1) the Biophotonics program; 2) the Cellular and Biochemical Engineering program; 3) the Disability and Rehabilitation Engineering program; and 4) the Engineering of Biomedical Systems program. The Biosensing program supports fundamental engineering research in the monitoring, identification and/or quantification of biological analytes and phenomena using innovations that exist at the intersection of engineering, life sciences, and information technology. Projects submitted to the program must advance both engineering and life sciences. The Biosensing program encourages proposals that, in addition to advancing biosensing technology, address critical sensor needs in biomedical research, public health, food safety, agriculture, forensics, environmental protection, and homeland security. Proposals are especially encouraged in areas of critical need: sensing technologies that can enable monitoring and surveillance of the environment and/or individuals for novel infectious agents; platform technologies that can readily be modified as soon as new agents are detected, sequenced, and/or otherwise characterized to enable rapid deployment of sensors in clinics and the environment; and adaptive and/or multiplex sensing technologies that can help the nation prevent the spread of the next global pandemic. Major areas of interest for the program include: Novel signal transduction principles and mechanisms that enable sensitive and specific biosensors, suitable for measurements in multiple ar...

Summary is not available yet.

The Engineering Design and Systems Engineering (EDSE) program supports fundamental research that advances design science and/or systems science through the creation of new knowledge about the design of engineered artifacts. Engineered artifacts include, but are not limited to, devices, products, processes, platforms, materials, organizations, systems, and systems of systems. The program focuses on design as a system, in which designers, the artifacts they create, the methods they use to create them, and the environment in which this occurs are all subject to rigorous scientific inquiry, along with the interactions among these elements. The EDSE program strongly encourages proposals that embrace the multidisciplinary nature of design and supports well-defined collaborations of experts in design science and/or systems science with experts in other domains, including (but not limited to) the social, behavioral, computational, and natural (biological and physical) sciences. Competitive proposals will be firmly grounded in theory, will demonstrate the potential of the proposed work to improve design, and will include a plan to rigorously assess the performance and effectiveness of the proposed research methods across all domains involved. In particular, the EDSE program supports fundamental contributions in areas that include but are not limited to design representation; design optimization; design validation; mechanism design; robotics and intelligent system design; design of engineered materials systems; design cognition; design collaboration; data science and artificial intel...

The Foundational Research in Robotics (FRR) program, jointly led by the CISE and ENG Directorates, supports research on robotic systems that exhibit significant levels of both computational capability and physical complexity. For the purposes of this program, a robot is defined as intelligence embodied in an engineered construct, with the ability to process information, sense, plan, and move within or substantially alter its working environment. Here intelligence includes a broad class of methods that enable a robot to solve problems or to make contextually appropriate decisions and act upon them. The program welcomes research that considers inextricably interwoven questions of intelligence, computation, and embodiment. Projects may also focus on a distinct aspect of intelligence, computation, or embodiment, as long as the proposed research is clearly justified in the context of a class of robots. The focus of the FRR program is on foundational advances in robotics. Robotics is a deeply interdisciplinary field, and proposals are encouraged across the full range of fundamental engineering and computer science research challenges arising in robotics. To be responsive to the FRR program, each proposal should clearly articulate the following three points: The focus of the research project should be a robot or a class of robots, as defined above. [Is there a robot?] The goal of the project should be to endow a robot or a class of robots with new and useful capabilities or to significantly enhance existing capabilities. [Will a robot gain a new or significantly improved capabilit...

Summary is not available yet.

The Mechanics of Materials and Structures program supports fundamental research in mechanics as related to the behavior of deformable solid materials and structures under internal and external actions. The program supports a diverse spectrum of research with emphasis on transformative advances in experimental, theoretical, and computational methods. Submitted proposals should clearly emphasize the contributions to the field of mechanics. Proposals related to material response are welcome, including, but not limited to, advances in fundamental understanding of deformation, fracture, and fatigue as well as contact and friction. Proposals that relate to structural response are also welcome, including, but not limited to, advances in the understanding of nonlinear deformation, instability and collapse, and wave propagation. Proposals addressing mechanics at the intersection of materials and structures, such as, but not limited to, meta-materials, hierarchical, micro-architectured and low-dimensional materials are also encouraged. Proposals that explore and build upon advanced computing techniques and tools to enable major advances in mechanics are particularly welcome. For example, proposals incorporating reduced-order modeling, data-driven techniques, and/or stochastic methods with a strong emphasis on validation are encouraged. Also welcome are proposals addressing data analytics for deformation or damage response deduction from large experimental and computational data sets. Similarly, proposals that explore new experimental techniques to capture deformation and failure info...

Awards will be made as cooperative agreements to accredited Minority Serving Institutions (MSIs) partnered with non-profit organizations in the United States that are eligible to apply for this NASA Research Announcement (NRA). The period of performance for an award is up to 2 years. Prospective proposers are requested to submit any questions in writing to NASAMUSIC@nasaprs.com no later than 10 business days before the proposal due date so that NASA will have sufficient time to respond. Proposers to this NRA are required to have the following, no later than the due date: 1) a Data Universal Numbering System (DUNS) number, 2) a valid registration with the System for Award Management (SAM) [formerly known as the Central Contractor Registry (CCR)], 3) a valid Commercial And Government Entity (CAGE) Code, 4) a valid registration with NASA Solicitation and Proposal Integrated Review and Evaluation System (NSPIRES) (this also applies to any entities proposed for sub-awards or subcontracts.) Consult Appendix H Section H.3.1 for more eligibility information. Consult Appendix H Section 2.2 regarding teaming requirements and partnership guidelines. The goal of NASA MUSIC is: to provide strategic effort that will leverage research and contract relationships of MSIs and NASA through relationships developed by non-profit organizations that may include collaboration of subject matter experts and access to NASA research facilities; An effort to improve STEM education and research at MSIs; A funded activity that seeks to build institutional capacity of MSIs; An activity to support long-ter...

Summary is not available yet.

The Marine Geology and Geophysics Core Program supports research on all aspects of the geology and geophysics of the present ocean basins and margins, as well as those of the Great Lakes. The Program supports science that includes: Structure, composition, tectonics, and evolution of the oceanic lithosphere Paleoceanography, paleoclimate, and sea level change Submarine volcanology, petrology and geochemistry of the oceanic crust and upper mantle lithosphere Marine hydrogeology, water-rock interaction, seeps and gas hydrates Hydrothermal venting and in situ fluid processes, and associated geochemistry Geochemical indicators of life operating below the seafloor Marine sedimentology, stratigraphy, sediment transport, and diagenesis Mid-ocean ridge spreading, back-arc rifting, transform processes, and ocean island/seamount formation and evolution Submarine components of subduction zone systems and passive margins Marine geohazards (e.g., earthquakes, faulting, mass wasting, geological aspects of tsunamis) Coastal processes (e.g., geological aspects of hurricanes, sea-level change, erosion, offshore deposition) The Marine Geology and Geophysics Program supports acquisition of new field data and the leveraging of and/or synthesis of existing data. The program supports analytical and laboratory experimental projects, methods development, and modeling. All activities should have relevance to and advance the understanding of marine geoscience processes. The Program interfaces with NSF programs across the Geosciences and across the Agency. For proposals that cross between Programs, pr...

Proposals should be submitted via email to the Public Affairs Section of the U.S. Embassy: PASGrantsAustralia@state.gov. Post's grant proposal forms can be found at the link below. Please include as many specific details as possible, including a project timeline and a description of how the U.S. Embassy would be involved and acknowledged in conjunction with the project. Please include a detailed budget, as well as information about cost sharing by other entities.

Summary is not available yet.

The Engineering for Civil Infrastructure (ECI) program supports fundamental research in geotechnical, structural, materials, architectural, and coastal engineering. The ECI program promotes research that can shape the future of the nation’s physical civil infrastructure and that can contribute to climate change adaptation and mitigation, and hazards and disaster resilience. Types of civil infrastructure that the ECI program considers include, but are not limited to, buildings, residential construction, earth and earth retaining structures, and components of flood protection systems; water, waste disposal, and wastewater systems; energy infrastructure (excluding nuclear); and transportation systems (excluding pavements). Both disciplinary and convergent research that can address the challenges of physical civil infrastructure to be resilient and sustainable over its service lifetime are of particular interest. Broader impacts of ECI research include fostering community welfare for an equitable and prosperous nation and promoting environmentally friendly, circular economy policies. The ECI program supports research that advances knowledge on the behavior of physical civil infrastructure subjected to and interacting with the natural environment during construction; under service and long-term conditions, including increased demands due to climate change adaptation and other emerging stressors; and under conditions caused by single or multiple extreme hazard events (extreme weather, windstorms, earthquakes, tsunamis, storm surges, landslides, and fire, including wildland-urban....

REAP Renewable Energy Systems and Energy Efficiency Improvement Program.Refer to Application Package AND Application Instruction links to obtain all necessary forms for a complete application.Contact State Energy Coordinators with questions: http://www.rd.usda.gov/files/RBS_StateEnergyCoordinators.pdf

Crosscutting Activities in Materials Research (XC) coordinates and supports crosscutting activities within the Division of Materials Research (DMR) and more broadly across NSF. The emphasis within XC is diversity and inclusion, international cooperation, and education (including experiential learning at REU/RET Sites). Additionally, activities that broadly engage the community, such as summer schools, institutes, workshops, and conferences that do not fit within just one or two programs in the Division of Materials Research, may be supported by XC.If preparing a workshop proposal, follow the Special Guidelines for Conference Proposals outlined in the Proposal & Award Policies & Procedures Guide (PAPPG). Occasionally projects crossing several programs in DMR are shifted to XC or co-funded by XC. The goal is to bring greater visibility to these projects through DMR’s XC website. Proposals are welcome that do not fit elsewhere at NSF that are also highly relevant for the materials research and education community. Some XC activities are co-funded with other NSF units. XC does not handle traditional research proposals suitable for submission to topical or other programs in DMR. For this reason, the XC Team welcomes inquiries that include a draft of one-page NSF summary, or a shorter write-up. It is highly recommended that you contact one of the Program Directors for XC prior to submission of a full proposal exceeding $50,000. Crosscutting Activities in Materials Research (XC) replaced the Office of Special Programs in Materials Research (OSP) in 2016. Diversity: Activitiesthat....

This is a Notice of Intent only. This Task Agreement is being awarded under Cooperative Agreement P15AC00572 which was already awarded under a competitive process. No applications are being accepted at this time

Summary is not available yet.

**PLEASE REVIEW FULL SPECIAL NOTICE** Funding Opportunity Title: Low-Cost Chip-Scale Atomic Clock (LC CSAC) Funding Instrument Type: Technology investment agreement The aim of this Special Notice under the ARL BAA (W911NF-17-S-0003), under Grants.gov Opportunity W911NF-17-S-0003-SPECIALNOTICE-LC-CSAC, is to fund a team or multiple teams to design, manufacture, and deliver a battery-powered atomic clock that achieves identical (or better) size, weight, and power (SWaP) and performance to the commercially available chip-scale atomic clock (CSAC) with a selling price goal of < $300/unit in high volume.   Precise timing is critical for numerous Army applications such as navigation, communications, surveillance, and synchronization of sensors and systems. Assured PNT solutions currently rely on acquiring GPS signals, which may not be readily available in increasingly contested environments. Commercially available silicon MEMS and quartz oscillators (TCXO, OCXO) are unable to provide GPS holdover in the event of a GPS outage, except for high-end OCXOs that may be considered large and power hungry for certain applications. To ease reliance on GPS, long-holdover clocks with SWaP-C appropriate for various DoD platforms are necessary to enable mission-critical functions even in contested environments. Current high-performance atomic clocks (maser, laser-cooled cesium fountain) serve as standards and are large, expensive, and require regular monitoring and exquisite environmental control.   Since the early 2000s, the chip-scale atomic clock (CSAC) has been developed and successfully m...

The Accountable Institutions and Behavior (AIB) Program supports basicscientific research that advances knowledge and understanding of issues broadly related to attitudes, behavior, and institutions connected to public policy and the provision of public services.Research proposals are expected to be theoretically motivated, conceptually precise, methodologically rigorous, and empirically oriented. Substantive areas include (but are not limited to) the study of individual and group decision-making, political institutions (appointed or elected), attitude and preference formation and expression, electoral processes and voting, public administration, and public policy. This work can focus on a single case or can be done in a comparative context, either over time or cross-sectionally.The Program does not fund applied research.The Program also supports research experiences for undergraduate students and infrastructural activities, including methodological innovations. In addition, we encourage you to examine the websites for the National Science Foundation’s Law and Science(LS), Security and Preparedness (SAP) and Research Infrastructure in the Social and Behavioral Sciences (RISBS) programs.

Summary is not available yet.

The Advanced Manufacturing (AM) program supports the fundamental research needed to revitalize American manufacturing to grow the national prosperity and workforce, and to reshape our strategic industries. The AM program accelerates advances in manufacturing technologies with emphasis on multidisciplinary research that fundamentally alters and transforms manufacturing capabilities, methods and practices. Advanced manufacturing research proposals should address issues related to national prosperity and security, and advancing knowledge to sustain global leadership. Areas of research, for example, include manufacturing systems; materials processing; manufacturing machines; methodologies; and manufacturing across the length scales. Researchers working in the areas of cybermanufacturing systems, manufacturing machines and equipment, materials engineering and processing, and nanomanufacturing are encouraged to transcend and cross domain boundaries. Interdisciplinary, convergent proposals are welcome that bring manufacturing to new application areas, and that incorporate challenges and approaches outside the customary manufacturing portfolio to broaden the impact of America’s advanced manufacturing research. Proposals of all sizes will therefore be considered as justified by the project description. Investigators are encouraged to discuss their ideas with AM program directors well in advance of submission at AdvancedManufacturing@nsf.gov.

The Biomechanics and Mechanobiology (BMMB) program is part of the Mechanics of Materials cluster within the Division of Civil, Mechanical, and Manufacturing Innovation. The BMMB program supports fundamental and transformative research that advances our understanding of engineering biomechanics and/or mechanobiology. The program emphasizes the study of biological mechanics across multiple domains, from sub-cellular to whole organism. Distinct from conventional engineering materials, the program encourages the consideration of diverse living tissues as smart materials that are self-designing. BMMB projects must have a clear biological component, a clear mechanics component, and must improve our understanding of the mechanical behavior of a living system. Investigations of the mechanical behavior of biological molecules, cells, tissues, and living systems are welcome. An important concern is the influence of in vivo mechanical forces on cell and matrix biology in the histomorphogenesis, maintenance, regeneration, repair, and aging of tissues and organs. The program is also interested in efforts to translate recent biomechanical and mechanobiological discoveries into engineering science. Multiscale mechanics approaches are encouraged but not required. Projects may include theoretical, computational, or experimental approaches, or a combination thereof. NSF does not support clinical trials; however, feasibility studies involving human volunteers or animal subjects may be supported if appropriate to the scientific objectives of the project. Proposals should address the novelty an...

The United States Mission to the United Nations and Other International Organizations in Geneva advances U.S. policy at more than 100 international organizations in Geneva. The U.S. Mission engages daily on issues as diverse as humanitarian assistance, global health, international trade, peace and security, arms control, and human rights.The Program:The United States Mission in Geneva is accepting project proposals for its fiscal year 2020 Small Grants Program. The Small Grants Program permits individuals, non-government organizations, think tanks, and government and academic institutions to seek funding for projects that promote U.S. policy priorities in the multilateral sphere. All programs must include a U.S. element or connection. Awards will be made to successful applicants subject to the availability of appropriated funds.Programs can include, but are not limited to, academic and professional lectures or panel discussion; exhibitions and cultural programs; professional and academic exchanges; professional development workshops and training; or public awareness campaigns.Priority Program Areas:Though all submitted projects will be considered for funding, we are currently giving priority to projects that highlight:Human rights, including protection of human rights defendersFreedom of religion or beliefPromoting peace and securityPublic-private partnershipsPreserving core UN valuesPromoting transparency, accountability, and efficiency in the UN systemFurther details about the program and how to apply at the following link: https://geneva.usmission.gov/annual-program-stat...

Summary is not available yet.

The Plant Biotic Interactions (PBI) program supports research on the processes that mediate beneficial and antagonistic interactions between plants and their viral, bacterial, oomycete, fungal, plant, and invertebrate symbionts, pathogens and pests. This joint NSF/NIFA program supports projects focused on current and emerging model and non-model systems, and agriculturally relevant plants. The program’s scope extends from fundamental mechanisms to translational efforts, with the latter seeking to put into agricultural practice insights gained from basic research on the mechanisms that govern plant biotic interactions. Projects must be strongly justified in terms of fundamental biological processes and/or relevance to agriculture and may be purely fundamental or applied or include aspects of both perspectives. All types of symbiosis are appropriate, including commensalism, mutualism, parasitism, and host-pathogen interactions. Research may focus on the biology of the plant host, its pathogens, pests or symbionts, interactions among these, or on the function of plant-associated microbiomes. The program welcomes proposals on the dynamics of initiation, transmission, maintenance and outcome of these complex associations, includingstudies of metabolic interactions, immune recognition and signaling, host-symbiont regulation, reciprocal responses among interacting species and mechanisms associated with self/non-self recognition such as those in pollen-pistil interactions. Explanatory frameworks shouldinclude molecular, genomic, metabolic, cellular, network and organismal processes...

U.S. Embassy Praia welcomes the submission of project applications for funding through the Ambassador’s Special Self-Help Program (SSH). If interested, please carefully review the instructions below. The SSH is a grass-roots grant assistance program that allows U.S. Ambassadors to support local requests for small community-based development projects. The purpose of the Special Self-Help Program is to support communities through modest grants that will positively impact local communities. The SSH philosophy is to help communities help themselves. Projects submitted for SSH must align with one or more U.S. Embassy priorities:  Economic diversification, including small business creation and income generation  Projects must aim to 1) generate sustainable income and employment opportunities in local communities, 2) advance economic diversification and encourage use of local natural resources or income generation, 3) promote a culture of entrepreneurship, and/or 4) improve economic or living conditions of a community. Women start-ups and women entrepreneurs Eligible projects assist women who are launching a business or who are overseeing the early stages of business development (between one to two years). Such projects must promote a culture of women-led entrepreneurship and innovation that can be replicated in the community. Projects must also promote profitable businesses that generate revenue and benefit the community. Social and economic inclusion and creation of opportunities Projects in this category must assist youth, children, women (particularly female heads of household...